Main features:

PUNCH FORMER is the fixture to grind the point of standard punches, for precise and fast operation.

Including the round, radius and multiangular punches, any special form can be ground precisely. Using, the attachments, the concave convex radius angular dressing of grinding wheel can be performed. In addition to panel grinding the punch former can be used for inspection, light milling, jig boring, indexing, radius dressing and machining EDM electrodes. The max. dia of punch grinding up to 1-1/8"

Specification:

• The precision of V shape and slide is within 0.004mm

• The dressing process of Slid 40mm.

• Essence material: YK30.

• Hardness: HRC56 - 58°

SPECIFICATIONS:

Max. Dia. Workpiece..................................32mm

V-Block ........................................................30mm (1-3/16">

Tangential travel........................................ 20mm (25/32") either side of center

V-Block Adjusting System ........................Rack & Pinion

Center Height at .........................................80mm{or 3-1/2")

Indexing Div................................................. 24 (every 15° )±10 seconds

Angle setting ...............................................By Sine System. Gage blocks

Roundness .................................................0.002mm (0.0001")

Parallelism ................................................ Within 0.005mm/50mm (0.0002 in 2n)

Squareness............................................... Within 0.005mm/50mm (0.0002 in 2")

Construction...............................................Hardened tool steel throughout for long

Accessory: and accurate life

1.C type clip-1 piece

2. Dressing arm for Bow handle-1 piece

3. 10x 80Ldiamond pen.

4. 4mm T type spanner -1 piece

5. 3.5mm hexagon type spanner-1 piece

6. Operating manual-1 set